Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
sourceour company
publisherkitty-sales manager
time2013/08/19
applications of RTV Silicone Rubber for car tire mold:
RTV Silicone Rubber for car tire mold is primarily intended for tires molds making , and can be used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
features description of RTV Silicone Rubber for car tire mold:
RTV Silicone Rubber for car tire mold is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high- temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
advantage of RTV Silicone Rubber for car tire mold:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
picture show of RTV Silicone Rubber for car tire mold:
TDS of RTV Silicone Rubber for car tire mold:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) | type |
620# | white | 100 : 3 | 30 | 4-6 | 20 | ≥ 35 | ≥ 25 | 23000 | ≤0.25% | 500% | condensation |
operations of RTV Silicone Rubber for car tire mold:
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
FAQs of RTV Silicone Rubber for car tire mold:
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicone rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicone rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicone rubber will slow down, so, the air in the mold will be eliminated gradually to reduce the air bubbles.
certification of RTV Silicone Rubber for car tire mold:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
package of RTV silicone rubber for car tire mold:
About us:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.