condensation cure silicone rubber

FOB Price: US $7.88200 - 1,000 kilogram

group name: RTV-2 silicone rubber for molds making

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: HY620# silicone rubber

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Wed, 23 Mar 2016 11:36:28 GMT

contact supplier

Paramtents

Form Liquid
HS 31900000
application mold making
brand hong ye silicone
origin Guangdong of China
Type condensation cure silicone
mixing ratio 100:3
deivery time 5 days after production
payment 100% T/T
color any color can be adjusted

Packging & Delivery

Min Order200 kilogram

Briefing

Brushing silicone rubber for the factory of products is made of cultural relic duplication, architectural decoration.

Detailed

Brushing silicone rubber for big size mold--728# silicone

This Brushing silicone rubber is mainly used in mold making for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, cultural relic duplication, architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation etc.

Brushing silicone rubber features:

This silicone material --728# silicone with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. Condensaton silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2%.

Brushing silicone rubber for big size molds --728# silicone basesheet

Appearance: White

Viscosity (cps): 30000

Hardness (A): 28-30

Tensile strength (Mpa) ≥ 3.0

Elongation break: (%)≥ 380

Retractility (%): ≤ 0.3

Curing agent mixed rate (%): 5

Operate time (min): 30

Curing time (hours): 4-6

Brushing silicone rubber for big size molds--728# silicone using instruction:

Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.