Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $17.88200 - 500 kilogram
US $15.88501 - 1,000 kilogram
US $12.881,001 - 2,000 kilogram
Paramtents
Place of Origin Guangdong, China (Mainland)
Brand Name HY silicone rubber
Model Number HY-E625 silicone rubber
MOQ 200kgs
Payment T/T L/C Western union
Color Any color
Package 25kg/drum 200kg/drum
FOB Price US$11.88-18.88
Features liquid
Port shenzhen
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Application of Liquid Silicone for Insoles:
HY-E625 silicone rubber for insoles is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Specification of Liquid Silicone for Insoles:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Typical Physical Properties of Liquid Silicone for Insoles:
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25℃) 110-20mins(60℃) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)
Using instructions of Liquid Silicone for Insoles:
Applicable to the injection molding process
Mixing component A with B evenly according its mix ratio, it is ready for use after degassing, it cures by heating up the temperature when pouring into the mold.
The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
Notice of Liquid Silicone for Insoles :
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
SHELF LIFE of Liquid Silicone for Insoles:
8-10 months when stored under 24℃ in original unopened packages.
PACKAGE of Liquid Silicone for Insoles:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.