Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
- Home
- About us
- Products
- RTV-2 silicone rubber for molds making
- Addition cure silicone rubber
- Life casting silicone rubber
- Liquid silicone rubber for insoles
- electronic potting silicone rubber
- injection moulding silicone rubber
- silicone foam
- Molding silicone rubber for tire molds
- Pad printing silicone rubber
- silicone rubber for textile coating& trademarks
- Other Silicone products
- Faqs
- News
- Certificate
- Contact us
Silicone rubber for sculpture mold making
- group name
- RTV-2 silicone rubber for molds making
- Min Order
- 1 piece
- brand name
- Hong Ye silicone rubber
- model
- 630#
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents
- update time
- Thu, 20 Mar 2014 08:55:40 GMT
Paramtents
sample free
port shenzhen
hs code 39100000
ship by sea
brand hongyejie
color any
supply ability 8 ton per day
payment L/C T/T
Certifications RoHS. MSDS.SGS ISO9001:2000
Delivery Time deliver within 3 days after payment confirmed in
Packging & Delivery
-
Min Order1 piece
Briefing
2. high reproduction times
3. good tensile strength
Detailed
Silicone rubber for sculpture mold making application:
Silicone rubber for sculpture mold making can be used for production of different sizes of polyurethane moulds,gypsum moulds,resin moulds,polyresin moulds,PU resin moulds,wax moulds,stone moulds ,epoxy moulds,acrylic moulds,polyester moulds making
A. Decorative items: cornices moulding ,columns moulding,ornaments moulding,statues molding.....
B. Casting of funiture and decoration crafts molding
C. Construction: prefabrication of decrative features molding,pavement molding,paving stone moulding,urban
furniture molding,concrete products molding
D. Soap moulding,candles crafts moulding,toys moulding,sculpture moulding
Silicone rubber for sculpture mold making main features:
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Excellent tensile and tear strength
5. Favorable hardness
6. High temperature resistance, acid and alkali-resistance and ageing resistance
7. High duplication times
Silicone rubber for sculpture mold making picture show:
Silicone rubber for sculpture mold makingTDS:
Model | 630# |
Appearance | white |
Mixing ratio (%) | 5% |
Operating time ( hours ) | 30~40 |
Curing time( hours ) | 3~4 |
Hardness (A°) | 30 |
Density ( g/cm 3) | 1.08 |
Viscosity (25 C°,mPa.s) | 22000~ 24000 |
Tensile-strength ( kgf/cm2 ) | 40 |
Tear-strength (kgf/cm ) | 25 |
Elongation-break(%) | ≥ 420 |
Retractility(%) | ≤0.25 |
Silicone rubber for sculpture mold making operation way:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts.
Part A is a kind of white flowing liquid and part B is the curing agent.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3
5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three:Brushing cast & Perfusion Molding operation
Silicone rubber for sculpture mold making frequently asked question:
What’s the solutions for the sticky of the silicone mold?
The main reason for this problem is that you do not handle the products or original molds well, then
you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded,
then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely..
Silicone rubber for sculpture mold making recommend asked question:
1. What is the materialof your product?
2. What is the sizeof your product?
3. How do you make silicone mold, by pouring or brushing?
Silicone rubber for sculpture mold making certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Silicone rubber for sculpture mold making package:
