liquid molding silicon rubber(for concrete,gypsum,resin)

FOB Price: US $8.58200 - 1,000 kilogram

group name: RTV-2 silicone rubber for molds making

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: HY625 HY630

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Thu, 20 Mar 2014 08:57:07 GMT

contact supplier

Paramtents

sample free
application molding silicone rubber
appearance liquid silicone
color any
brand hongyejie
hs code 39100000
port shenzhen
ship by sea
payment L/C T/T
supply ability 8 ton per day

Packging & Delivery

30cm x 40cm x 50cm
Min Order200 kilogram

Briefing

liquid molding silicon rubber can be used for:
1)concrete & plaster
2)candle & soap
3)stone & resin

Detailed

liquid molding silicon rubber(for concrete,gypsum,resin) application:

1. Decorative items: cornices,columns,ornaments ,statues

2. Casting: funiture and decoration

2. Construction: prefabrication of decrative feature,pavement,paving stone,urbanfurniture,concrete products

4. Soap,candles crafts,toys,sculpture

liquid molding silicon rubber(for concrete,gypsum,resin) datasheets:

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A⁰)	Tensile-strength	Tear-strength	Viscosity (mPas)	Shrinkage rate (%)	Elongation (%)
HongYe625#	white	100 : 5	45-60	4-6	23-26	45kgf/cm²	≥ 29kgf/cm	19500	≤0.3%	450%
HongYe630#	white	100 :5	30-40	3-5	29-31	49kgf/cm²	≥ 33kgf/cm	27000	≤0.3%	490%
Dowcorning3481	white	100 : 5	30-45	5-6	22-25	4.6Mpa	23kN/m	25000	≤0.5%	520%
Bluestar (3325 /585)	white	100 : 5	20-60	6-24	25-28	4.2Mpa	26kN/m	35000	≤0.7%	440%
Wacker®M4503	white	100 : 5	30-90	10-20	25	5.0(N/mm²	> 20N/mm	40000	≤0.5%	350%
SmoothonMoldMax®25	white	100 : 5	45	24	25	577psi	130pli	25000	002 in./in.	375%

liquid molding silicon rubber(for concrete,gypsum,resin) Picture show:

liquid molding silicon rubber(for concrete,gypsum,resin) Operation way:

Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Notes: Moulding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.

Step Three: Brushing cast & Perfusion Molding operation

liquid molding silicon rubber(for concrete,gypsum,resin) FAQ:

What’s the limitations of silicone?

a. When the hardness of silicon rubber is lower than 15 shore A, the tension, the tear strength, the ageing resistance, acid and alkali-resistance of silicon rubber will reduce respectively.
b. When the hardness of silicon rubber is higher than 50 shore A, the tension and the tear strength of silicon rubber will reduce, and the solidified silicon mold will be easily broken.

package of liquid molding silicon rubber(for concrete,gypsum,resin):