Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $7.89200 - 40,000 kilogram
US $5.4040,001 - 999,999 kilogram
Paramtents
Shaping Mode Silicone Mould
Product Material SILICONE RUBBER
Product SILICONE RUBBER
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
RTV -2 silicone rubber molds for toy replica
Usage of RTV -2 silicone rubber molds for toy replica:
For toy gifts and craftwork gift, products with complex fine details, and made in pouring way.
Description of RTV -2 silicone rubber molds for toy replica:
HY-638# silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2.
Applications of RTV -2 silicone rubber molds for toy replica:
Poly technique, lightings, candles, and molds in multiple pieces for large products.
Standard Datasheet of RTV-638 (RTV -2 silicone rubber molds for toy replica):
Model | Appearance | Viscosity (cs) | Hardness (Ao) | Tensile Strength (kgf/c) | Tear Strength (kgf/) | Elongation (%) | Mixing ratio(%) | Operating Time(H) | Curing Time(H) |
638 | White | 14000~16000 | 25~28 | ≥35 | ≥25 | ≥500 | 2~3 | 0.5 | 2~4 |
General Description OF RTV -2 silicone rubber molds for toy replica:
RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes,and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
Operation Instruction for RTV -2 silicone rubber molds for toy replica:
The product is white or red flowing liquid with general hardness of 2250A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Any questions of RTV -2 silicone rubber molds for toy replica, please feel free to contact Ms orianna:
TEL: 0086-755-89311348
FAX: 0086-755-89948030
MOBILE: 0086-18938867545
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.