Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $8.59100 - 40,000 kilogram
US $6.9540,001 - 999,999 kilogram
Paramtents
Application Mold making silicone rubber
H.S. code 39100000
Color white/off-white/red/yellow/blue
Shelf life 12 months
Appearance Liquid
Catalyst 4% for free
Molding method Pouring / brushing
Mixing ratio 100:5 / 100:4/ 100:3
MOQ 100kgs
Sample Free
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Features of Moulding silicon rubber
Silicone rubber for mold making are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion.
The typical model of Moulding silicon rubber
HY-638# silicon rubber is mainly used for toy gifts and craftwork gifts
The features of Moulding silicon rubber
with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2.
Applications for Moulding silicon rubber :
Poly technique, lightings, candles, and molds in multiple pieces for large products.
Standard Datasheet of Moulding silicon rubber :
Model | Appearance | Viscosity (cs) | Hardness (Ao) | Tensile Strength (kgf/c) | Tear Strength (kgf/) | Elongation (%) | Mixing ratio(%) | Operating Time(H) | Curing Time(H) |
638 | White | 14000~16000 | 25~28 | ≥35 | ≥25 | ≥500 | 2~3 | 0.5 | 2~4 |
General Description of Moulding silicon rubber:
molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes,and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
Operation Instruction for Moulding silicon rubber:
The product is white or red flowing liquid with general hardness of 2250A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
All the information just for reference, any information about our silicone rubber, just feel free to Taylor Liu:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
Facebook: hyw(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.