Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $7.89100 - 40,000 kilogram
US $5.2340,001 - 999,999 kilogram
Paramtents
color white
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring and brushing
hardness 25 shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Usage of rtv silicone rubber for mold making
rtv silicone rubber for mold making for PU/poly resin, unsaturated resin, plaster, candles and gypsums crafts, toys, soap, statuary ,concrete product mol making,etc.
-------------------------------
Features of rtv silicone rubber for mold making
flowable liquid silicone and curing agent.
Cures at room temperature within 2-4 hours.
An exceptional fluidity and good operability, easy to demold.
Good tensile and tear strength, low shrinkage.
High duplication times.
-----------------------------
Advantages of rtv silicone rubber for mold making
A. Shore A from 15 to 40 hardness
B. Good fluidity and good operability and good for pouring method.
C. Excellent mechanical properties, in particular tear strength and tensile strength.
D. Excellent flexibility and it is easy to demould.
E. High temperature resistance, high duplication times and repeated use.
F. There are a range of catalysts/curing agent/hardener allows the liquid rtv silicone rubber to fulfill requirements for various applications and various requirements on the operation time and curing time.
-------------------------------------------------
rtv silicone rubber for mold making curing agent and silicone proportion and reaction(Under room-temperature-25C)
1.Added with 2 percent of curing agent, silicone can still flow within 1.2-1.6 hours, mold can be released in 7-8 hours.
2.Added with 3 percent of curing agent, silicone can still flow within 1-1.2 hours, mold can be released in 6-7 hours.
3.Added with 4 percent of curing agent, silicone can still flow within 40-50 minutes, mold can be released in 5-6 hours.
------------------------------
Operation of rtv silicone rubber for mold making
1. deal with original moulds
2. brush on release agent
3. correct weigh accoring to mixng ratio
4. stir the two component evenly
5. vacuum-pumping
6. pouring
----------------------------------------
TDS of rtv silicone rubber for mold making
Model:630#
Appearance:white/red
Viscosity(cs):15000-17000
Hardness(A):30
Tensile strength(kgf/cm)≥35-36
Elongation break(%):≥450
Retractility(%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min):30
Curing time(hours):2-4
Mixing proportion of curing agent:4%
Any questions of Silicone Rubber, please feel free to contact Miss Leah:
TEL: 086-755-892122382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.