Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $9.38200 - 40,000 kilogram
US $6.9840,001 - 999,999 kilogram
Paramtents
color white
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Mold Making Silicon Rubber, Mold Making Silicone Rubber
Mold Making Silicon Rubber, Mold Making Silicone Rubber Usage
Mold Making Silicon Rubber, Mold Making Silicone Rubber for PU/poly resin, unsaturated resin, plaster, candles and gypsums/concrete crafts, toys, artificial stone ,soap, statuary ,casting molds making,etc.
Model | 625# |
Appearance | white |
Mixing proportion of curing agent (%) | 4% |
Operating time (mins 25 0C ) | 30-45 |
Curing time(hours 25 0C) | 6-8 |
Hardness (A°) | 25 |
Density ( g/cm 3) | 1.08 |
Viscosity (mPas -25 0C) | 18000-20000 |
Tensile-strength(kgf /cm2) | ≥39 |
Tear-strength (kgf /cm) | ≥25 |
Elongation-break(%) | ≥ 425 |
Mold Making Silicon Rubber, Mold Making Silicone Rubber users instriction
Mold Making Silicon Rubber, Mold Making Silicone Rubber and silicon are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability.When mixed with 3%,5% curing agent, they can still be operated within 30 minutes,but will be formed after 2-3 hours.With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
This product is a white or red flowable liquid with a hardness of 22,50A° when cured. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
Mold Making Silicon Rubber, Mold Making Silicone Rubber technical guidelines
1. Stir the base (Part A) well beofre use (except when depending on machine ).
2. Shake the catalyst container (Part B) well before use.
3. This is a 100 Part A to 3-5 Part B mixing ratio by weight.Weigh the desire amount of base into a clean mixing container.
4. Weight the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stick until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.
Mold Making Silicon Rubber, Mold Making Silicone Rubber feactures:
1.Two-part silicon rubber:flowable liquid silicon and curing agent.
2.Cures at room temperature within 2-4 hours.
3.An exceptional fluidity and good operability, easy to demold.
4.Good tensile and tear strength, low shrinkage.
5. High duplication times.
Any questions, please feel free to contact Ms. Judy
MOBILE: 0086-18938867591
Skype: judy.zhao723
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.