Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.26200 - 40,000 kilogram
US $7.9640,001 - 999,999 kilogram
Paramtents
Available color Translucent
Certifications RoHS.MSDS.SGS ISO9001:2000
Operation way brushing
Hardness 42 shore A
Curing time 20 - 30min
Mixing proportion of curing agent 1:1
Operating time 20-30min
Viscosity (MPas -25 0C) 30000 ± 5000(part A),5000 ± 500(part B)
Tensile-strength(kgf /cm2 ) 80 ± 5
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Description of Addition (platinum) RTV 2 Mold Making Silicone Rubber for Resin Products
Addition(platinum) RTV 2 mold making silicone rubber is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications of Addition (platinum) RTV 2 Mold Making Silicone Rubber for Resin Products
Addition(platinum) RTV 2 mold making silicone rubber could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
OPERRATING INSTRUCTION of Addition(platinum) RTV 2 mold making silicone rubber
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
4.Data sheet of Addition(platinum) RTV 2 mold making silicone rubber
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 20-30 |
Curing time (Mins 25°C) | 120 - 180 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 80 ± 5 |
Tear-strength (kgf /cm2 ) | 7 ± 2 |
Elongation-break(%) | 300 ± 50 |
Retractility(%) | ≤0.1 |
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE:Packed in clean 20kg/pail, 200kg/pail.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.