Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.80100 - 40,000 kilogram
US $5.8040,001 - 999,999 kilogram
Paramtents
Grade Standard Agriculture Grade,Industrial Grade
Appearance liquid silicone
Application for molding
usage liquid silicone for plaster molding
color white,green,blue or as your need
certificate SGS,ROSH,ISO9001
payment TT/LC
delivery by sea and air
samples free
MOQ 100
mix 1:1 or 10:1
features good tension,low viscosity, suitable hardness
promotion over 500KG 2% discount
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
RTV-2 mold making silicone rubber
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (mPas) | Shrinkage rate (%) | Elongation (%) |
628# | white | 100 : 2 | 30 | 2-4 | 28 | ≥ 39 | ≥ 26 | 25000±2000 | ≤0.3% | 490% |
638# | white | 100 : 2 | 30 | 2-4 | 32 | ≥ 41 | ≥ 29 | 29000±2000 | ≤0.3% | 450% |
RTV2 silicon rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts,etc.
RTV-2 mold making silicone features
(1)high tensile & tear strength
(2) Low linear shrinkage
(3)free Curing agent
(4)brushing & pouring
(5) high duplication times
RTV-2 mold making silicone Using instruction:
Component A is white flowing liquid and component B is the curing agent. For example, take silicone rubber of 100g and add 2g curing agent for mixing evenly (silicone rubber and curing agent must be measured accurately). After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. If you don't have vacuum machine, please add 1.2% or 1.5% curing agent so that the bubbles can bubble itself. Since the less curing agent you add, the slower the mould will curdle, the bubbles will bubble out itself.
Note: according to user's requirements, production, commissioning, different color and performance products
FAQ of RTV-2 mold making silicone rubber
Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicone rubber.
b. Using the silicone rubber with a high hardness to make molds for small sized products
with delicate and intricate designs .
Payment: cash, bank transfer, the collection of money, pay treasure, paypal
Packing: 25KG, 200KG
Quality/security authentication: the RoHS, MSDS, SGS
Sample: free
Delivery time: three days
Whatever you have any further information required or suggestion, pls feel free to send also can call mobile 0086-18938867531(wenson )
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.