Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $8.28200 - 40,000 kilogram
US $6.0040,001 - 999,999 kilogram
Paramtents
Appearance of art & crafts silicone Liquid
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Metallic Art & Crafts Mold Making Silicone Rubber
RTV-2 room temperature addition silicone rubber series
Model: HY-Q642 Metallic art & crafts mold making silicone rubber
Usage: Silicone rubber is mainly designed for metallic art & crafts and food grade mold making, pad printing etc.
Datasheet of metallic art & crafts mold making silicone rubber
Model | HY-Q642 |
Appearance | High Transparent |
Mixing Ratio | 10:1 |
Viscosity part A (Mpa.s) | 55000±2000 |
Viscosity part B (Mpa.s) | 3500±1000 |
Viscosity mixed(Mpa.s) | 7000 ±1000 |
Operating time ( Mins 25°C) | 20-40mins |
Curing time ( Hrs 25°C) | 3~12hrs |
Hardness (A°) | 40-42 |
Tensile-strength(kgf /cm2 ) | 45±3 |
Tear-strength (Kgf/cm ) | 20±3 |
Elongation-break(%) | 280±30 |
Retractility(%) | ≤0.1 |
Featurers of metallic art & crafts mold making silicone rubber :
Description of metallic art & crafts mold making silicone rubber :
HY-Q642 addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
HY-Q642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Application of metallic art & crafts mold making silicone rubber :
HY-Q642 addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Operation instruction of metallic art & crafts mold making silicone rubber :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of metallic art & crafts mold making silicone rubber :
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
More information of art & crafts silicone rubber, pls feel free to contact Taylor:
Tel:086-755-89948006
Mob:086-18938867522
Skype: taylordl828
Facebook: hyw(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.