Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $10.00100 - 40,000 kilogram
US $6.0040,001 - 999,999 kilogram
Paramtents
HS. Code 39100000
Purity 100%
Color white/ off-white/ blue/ red
Application Mold Making Silicone Rubber
Molding method Pouring , brushing
Appearance Liquid
Package vacuumed packing
Shelf life 12 months
MOQ 100KGS
Sample Free
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
100:5 Mixing Ratio Silicone Rubber for Mold Making
Application of 100:5 mixing ratio silicone rubber for mold making
100:5 mixing ratio silicone rubber for mold making is condensation cured / tin cured mold making silicone rubber, mold making silicone rubber is suitable for industries such as toys, gifts, decoration, plate engrave, human replica, art crafts, resin crafts, poly resin crafts, unsaturated resin crafts, candle crafts, plastic crafts, stationeries, plaster crafts and Buddhist statue crafts.
Datasheet of 100:5 mixing ratio silicone rubber for mold making ---- Model: 625#
Model | Color | Mixing ratio (%) | Pot life (mins) | Demouled time (hrs) | Hardness(A0) | Tensile-strength (N/m2) | Tear-strength (N/mm) | Viscosity (cps) | Elongation (%) |
625# | white | 3-5 | 30 | 4±1 | 25±2 | 35±2 | 20±2 | 19000±3000 | ≥420 |
Features of 100:5 mixing ratio silicone rubber for mold making
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
Pourable moulding operation for 100:5 mixing ratio silicone rubber for mold making
100:5 mixing ratio silicone rubber for mold making is suitable for simple products with the smooth surface.Without any mold lines,which helps you save time and is easy for operation.Evenly and slowly perfuse the mixed silicone rubber into the square fram.After the cross linking reaction and the silicone rubber turns dry,you can take the products out.Thus,the mold has been done.
(Note:we usaully use soft silicone rubber to make molds by perfusing,which is easy for demoulding and will not damage the product in the silicone molds.)
Brushable moulding operation for 100:5 mixing ratio silicone rubber for mold making
a. Evenly brush the mixed silicon rubber on the product which is covered with mold spray with a brush or a brush pen.
b. After the cross linking reaction (about 30 minutes), brush a second coat which can increase the tension and tear strength of the mold.
c. Cover a glass cloth on it after another 30 minutes of a second cross linking reaction, and use a brush pen or a brush to avoid any interstices.
d. Cover a third coat.
(Note: if you have high requirements for the tension and the tear strength for the mold, please repeat step c and step d. Hence, the finished silicone moulds will have a good quality and a longer life, which can help you save cost and increase production efficiency.)
Moreinformaiton for 100:5 mixing ratio silicone rubber for mold making pls feel free to contact Taylor
Tel: + 86-755-89212380
Mob: +86-18938867522
Skype: taylordl828
Facebook: hyw(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.