Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $9.78200 - 40,000 kilogram
US $5.3640,001 - 999,999 kilogram
Paramtents
color tranparent 1:1 MIX
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 30 shore A
shrinkage low shrinkage
visicosity light visicosity
deformation little deformation
shelf life 12 months
duplication times high duplication times
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
High strength sculpture mold making silicone rubber applications
sculpture mold making silicone rubber will reproduce the finest detail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements. Rubber silicone for making baluster mold can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).
sculpture mold making silicone rubberMain features
• Cold vulcanize with the appropriate catalyst
• Can be applied by direct pouring or by spreading
• Easy mould building, no need of particular equipments
• High elasticity, easy demoulding also for objects with undercuts
• Extreme faithfulness in the reproduction of details from any original model
• Odourless and no toxic
• Anti-adherent (no need of release agents for demoulding)
• poly-addition curing: low linear shrinkage and higher stability in time
Datasheets of sculpture mold making silicone rubber 630#
Model | 630# |
Appearance | white |
Mixing ratio of curing agent (%) | 4% |
Operating time (mins 25 0C ) | 30-50mins |
Curing time(hours 25 0C) | 2-5 hrs |
Hardness (A°) | 30±2 |
Density ( g/cm3) | 1.08 |
Viscosity (mPas -25 0C) | 22000±1000 |
Tensile-strength(kgf /cm2) | ≥49 |
Tear-strength (kgf /cm) | ≥33 |
Elongation-break(%) | ≥ 460 |
Retractility(%) | ≤0.25 |
How to making silicone rubber molds with sculpture mold making silicone rubber ?
a.deal with the orignal sculpture
b.sprayed on release agent
c.weigh correct molding silicone rubber according to the instruction
d.stir two part molding silicone compound evenly
e.vacuum pumping about 5 min
f.poured on or brushed on the orignal sculpture
g.curing 2-4 hours
h.demould and apply to casting
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.