Gypsum sculpture molds making by manual mold silicone rubber

Applications of the  manual mold silicone rubber for plastic molds making :

silicone rubber for plastic molds making  also can be applied for manual mold design, PVC plastic mould, cement product mold, low melting-point alloy mould, alloy toy crafts, plastic toy, craftwork, gift and stationery, big statue, cultural relic duplication,pad printing orientation, electronic appliances vibration resistance, etc.

Features of manual mold making silicone rubber

1. Good characteristics of easy-operation 

2. Light viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

FAQs of the manual  mold silicone rubber  :

 The solutions of the sticky of the silicone mold?

 The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated

pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.

The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.

Any questions of Gypsum sculpture molds making by manual mold silicone , please feel free to contact Kaimi:

TEL: 086-755-89212369

FAX: 086-755-89948030

MOBILE:086-18938867528

Website:  www(dot)szrl(dot)net

E-MAIL: hyju(at)szrl(dot)net

skype:hyjiangying