liquid silicone to make tire molds

FOB Price

US $15.00100 - 40,000 kilogram

US $12.0040,001 - 999,999 kilogram

group name: Molding silicone rubber for tire molds

Min Order: 100 kilogram

brand name: Hong Ye silicone rubber

model: E635

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 15:56:35 GMT

contact supplier

Paramtents

color white
HS code 39100000
sample available
normal packing 25kgs per drum
delivery within 3 days
usage for mold making
MOQ 200kgs
shelf life one year
application car tyre making

Packging & Delivery

Min Order100 kilogram

Briefing

liquid silicone to make tire molds :
1.Good elasticity
2.Good tensin and high tear strength
3.High temperature resistan

Detailed

liquid silicone to make tire molds Applications :

Silicone rubber for tyre molds is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Characteristics of liquid silicone to make tire molds

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Datesheets of liquid silicone to make tire molds :

Item No	Color	Hardness (A°)	Viscosity (CS)	Tensile-strength( kgf /cm2 )	Tear-strength (kgf /cm² )	Elongation-break(%)	Mixing Ratio of silicone and catalyst
E635	Translucent	35±2	8000±2000	≥60	≥13	≥400	1:1
E642	Translucent	42±2	10000±2000	≥60	≥15	≥450	1:1

Silicone rubber for liquid silicone to make tire molds :

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

our factory

Any questions of liquid silicone to make tire molds , please feel free to contact Maggie:

TEL: 086-755-89212380

FAX: 086-755-89948030

MOBILE:086-18938867501

Website: www(dot)szrl(dot)net

E-MAIL: hysd(at)szrl(dot)net