Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.90100 - 40,000 kilogram
US $12.8040,001 - 999,999 kilogram
Paramtents
color white
HS code 39100000
sample available
normal packing 25kgs per drum
delivery within 3 days
usage for mold making
MOQ 200kgs
shelf life one year
application car tyre making
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Descriptions of liquid silicone for tyre molding
Condensation Cure Liquid Silicone Rubber For Tyre Molding is a kind of silicon rubber for PU/poly resin, unsaturated resin, plaster, candles and gypsums crafts, toys, soap, statuary ,casting molds making,etc.
FEATURES of liquid silicone for tyre molding
Two-part silicon rubber: flowable liquid silicon and curing agent.
Cures at room temperature within 4-5 hours.
An exceptional fluidity and good operability, easy to demold.
Good tensile and tear strength, low shrinkage.
Technical Parameters of liquid silicone for tyre molding
Model | 620# |
Appearance | adjustable |
Mixing proportion of curing agent (%) | 4% |
Operating time (mins 25 0C ) | 40 |
Curing time(hours 25 0C) | 3~4 |
Hardness (A°) | 20±2 |
Density ( g/cm3) | 1.08 |
Viscosity (mPas @ 25 0C) | 13000~15000 |
Tensile-strength(kgf /cm2) | ≥36 |
Tear-strength (kgf /cm) | ≥23 |
Elongation-break(%) | ≥ 440 |
Retractility(%) | ≤0.3 |
Operation instruction of liquid silicone for tyre molding:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 100:4 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3minutes . (If there is no vacuum
machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Any questions of liquid silicone for tyre molding, please feel free to contact Maggie
TEL: 086-755-89212380
FAX: 086-755-89948030
MOBILE:086-18938867501
Website: www(dot)szrl(dot)net
E-MAIL: hysd(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.