Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $16.50100 - 40,000 kilogram
US $6.5040,001 - 999,999 kilogram
Paramtents
color blue/red/white/yellow/white silicone rubber
Mixing proportion of curing agent (%) 2%-3%
Operating time (hour 25 0C ) 0.5
Curing time(hours 25 0C) 6-8
Hardness (A°) 28-30
Density ( g/cm 3) 1.09
Viscosity (CPS 25 0C) 18000-25000
Tensile-strength(kgf /cm2 ) ≥37
Tear-strength (kgf /cm) ≥26
Elongation-break(%) ≥ 500
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Shenzhen Hongyejie Technology Co.,Ltd-------silicone rubber manufacturing factoy has a complete line of tin and platinum silicone rubber moulding materials that cure at room temperature (RTV), capturing fine detail.
Introduction of Tin-based silicone rubber for mold making
moulding material Tin-based silicone rubber , also called condensation-cure silicones, are:
1)two-component materials which cure at room temperature (RTV) to flexible, high tear-strength rubbers.
2)poured onto models or brushable by adding a thixotropic additive.
3)ideal for molds where easy release or high temperature resistance is required.
4)Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals, soap and candle silicone mold.
The operating method of Tin-based silicone rubber for mold making
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
Tin-based silicone rubber for mold making Features:
A. a low cost way to make moulds
B. a mould is built using a layer process
C. more time and fairly lengthy process to make your mould
D. easy to use
E. amazing elongation to break
Datasheet of Tin-based silicone rubber for mold making
Model | 630# |
Appearance | white |
Mixing proportion of curing agent (%) | 2%-3% |
Operating time (hour 25 0C ) | 0.5 |
Curing time(hours 25 0C) | 6-8 |
Hardness (A°) | 28-30 |
Density ( g/cm 3) | 1.09 |
Viscosity (CPS 25 0C) | 18000-25000 |
Tensile-strength(kgf /cm2 ) | ≥37 |
Tear-strength (kgf /cm) | ≥26 |
Elongation-break(%) | ≥ 500 |
Retractility(%) | ≤0.3 |
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C at sight, T/T, West Union
Supply Ability: 8 Ton per Day
If you have any questions with Tin-based silicone rubber for mold making, pls feel free to contact Ms Aimee
MSN: aimeezhou055722(at)hotmail(dot)com
Skype:aimee055722
Email:hysz(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867541
Trademanager:cn200039753
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.