Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.63200 - 40,000 kilogram
US $6.6840,001 - 999,999 kilogram
Paramtents
color Translucent
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring
hardness 20~25 shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Application of liquid RTV silicone molds for soap toys making
Besides the soap mold making, liquid RTV silicone molds for soap toys making also could be used for making concrete stones, wax molds, PU molds, rapid prototyping ,resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making etc.
Characteristics of Liquid RTV silicone for soap toys mold making
Low shrinkage (less than 0.1%)
high tensile and tear strength with high copy times
easy for operation (mixing ratio at 1:1 )
good fluidity easy for pouring operation ( in round 10000 cps )
good flowability
resistant to high temperature and corrosive,
high anti-tensile strength and anti-tearing strength, low shrinkage
Instructions of Liquid RTV silicone for soap toys mold making
1.Weigh a certain amount of silicone rubber of both parts, the mixing ration of part A and part B is 1:1. Ensure that all the silicone rubber is used in short time.
2. Fully stirring the silicone rubber, then put them in vacuum and pump 3-5 minutes, make moulds after bubbled.
3. Curing speed is closely related to the temperature and humidity, the higher the temperature and humidity, the faster the curing. Customers can choose curing agent or adjust the amount of curing agent in order to reach appropriate curing speed according to the weather.
Liquid RTV silicone for soap toys mold making
Datasheet of liquid RTV silicone molds for soap toys making
Model | HY-E620# | HY-E625# |
Appearance | Translucent | Translucent |
Mixing proportion of curing agent (%) | 1:1 | 1:1 |
Operating time (mins 25 0C ) | 20-30 | 20-30 |
Curing time(hours 25 0C) | 2-3h | 2-3 |
Hardness (A°) | 20±2 | 20±2 |
Density ( g/cm 3 ) | 1.08 | 1.08 |
Viscosity (mPas @ 25 0C) | 6000 ± 2000 | 6000 ± 2000 |
Tensile-strength(kgf /cm2 ) | 25 ± 2 | 25 ± 2 |
Tear-strength (kgf /cm ) | 20 | 20 |
Elongation-break(%) | 380 ± 50 | 380 ± 50 |
Retractility(%) | ≤0.1 | ≤0.1 |
Any questions of Silicone Rubber, please feel free to contact Miss Leah:
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.