Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $8.98200 - 40,000 kilogram
US $7.0540,001 - 999,999 kilogram
Paramtents
Certification SGS,MSDS,RoHS
HARDNESS 18-40A
Mixing Ratio 2%
Type silicone rubber
Appearance Fluid
Application plaster craft mold making
EINECS No 39100000
Purity 100%
Curing agent 3% for free charged
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
RTV silicone rubber for gypsum cornice molding
1. RTV silicone rubber for gypsum cornice molding applications:
RTV Rubber Silicon for Plaster Casting Cornice is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts , gypsum column ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
2. RTV silicone rubber for gypsum cornice molding operations:
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
As a professional manufacturer of molding silicone rubber, we can provide you the best quality silicone rubber with competitive price and free demold technology.
3. RTV silicone rubber for gypsum cornice molding datasheet:
Model | HongYe RTV 630# |
Appearance | White |
Mixing Ratio (%) | 20:1 |
Operating time (mins 25 0C ) | 40~50 |
Curing time(hours 25 0C) | 3~6 |
Hardness (A°) | 28±2 |
Viscosity (Mpas -25 0C) | 22000±1000 |
Tensile-strength(kgf /cm² ) | 42±2 |
Tear-strength (kgf /cm ) | 26±2 |
Elongation-break(%) | ≥ 450 |
Linear shrinkage(%) | 0.01~0.03 |
4. FAQs of RTV silicone rubber for gypsum cornice molding in the use of the operations:
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicone rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicone rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicone rubber will slow down, so, the air in the mold will be eliminated gradually to reduce the air bubbles.
Any questions, please feel free to contact Jesmine:
Mobile: 0086-18938867570
Fax: 0086-755-89948030
Tel: 0086-755-89212369
E-mail: hysk[at]szrl.net
MSN: JesmineWang[at]hotmail.com
Website: ..........net
Skype: Jesminehy
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.