Silicone Molds for Flexible Parts or Gaskets

With the right combination of molds you can produce, soft, flexible parts, with varying degrees of hardness and flex and some limited heat resistance.

Silicone Molds for Fibreglass

Want to manufacture fibreglass pieces with serious undercuts, silicone is the way to go. Well designed silicone molds will allow you to produce high levels of detail, undercuts, smooth flowing rounded corners and edges.

Silicone may well be the answer to your dilemma

Whether you need to reproduce three parts, 30 or even 300. Flat, oval, 3 dimensional, all are possible and as often as not, simple.

We offer you two easy solutions:

1. We can teach you how make your own molds
2. We will provide you the best quality silicone material once you learn how to make mold yourself.

Our TDS of HY-E series for your reference,you can compare with what you are using if you have used silicone rubber for mold making before,if not,we are professional to recommend you the most suitable model for you specially(pls well noted that we have many other models for your choosing,do feel free to contact if you do not find suitable as following),

 RTV-2 liquid Manual Molding Silicon operations 

 Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2% to 3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2 to 3 hours.

What should we do when the air bubbles appeared in the process of mold making ? 

To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair . If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.

Contact us

Name: Miss.Kelly

E-mail: hyjm(at)szrl(dot)net

MSN:kelly6in(at)hotmail(dot)com

Skype:kelly619106

Tel: 086-755-89212382

Mob:86-18938867564

Or you can email me directly by scan the following QR code,