Liquid RTV Silicone for Candle Mold Making

FOB Price

US $9.86100 - 40,000 kilogram

US $5.6040,001 - 999,999 kilogram

group name: RTV-2 silicone rubber for molds making

Min Order: 100 kilogram

brand name: Hong Ye silicone rubber

model: HY-625

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 16:18:40 GMT

contact supplier

Paramtents

Appearance white
Mixing proportion of curing agent (%) 5%
Operating time (mins 25℃ ) 30~40
Curing time(hours 25℃) 3~4
type of the silicone condersation cure silicone
hardness 25 shore A
certification SGS
Origin Shenzhen China
MOQ 200kg
shelf life 8~10 month

Packging & Delivery

Min Order100 kilogram

Briefing

Liquid RTV Silicone for Candle Mold Making
Light viscosity
Low shrinkage,age resistance
No deformation
Favorable tension

Detailed

Appilication of Liquid RTV Silicone for Candle Mold Making

Liquid RTV Silicone for Candle Mold Making is primarily intended for the reproduction of plate engrave ,human replica,for the mold making of poly resin crafts, PU crafts, PU resin crafts,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,soap mold,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

Features of Liquid RTV Silicone for Candle Mold Making

Liquid Silicone for Candle Mold Making is white or red flowing liquid with general hardness of 22-50A°after curing. Hongye mold making liquid silicon rubber is a kind elastic silicon rubber mold which features with resistance to

non-deformation

high-temperature

acid-alkali and expansion

high reproduction times

good tensile strength

tear strength and elongation.

Liquid RTV Silicone for Candle Mold Making

Operations of Liquid RTV Silicone for Candle Mold Making

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)

mold silicone rubber for candle mold reproduction

TDS of the liquid silicone which is suitable to make candle mold.

Model	620#	HY-E620#
Appearance	White	Translucent
Mixing proportion of curing agent (%)	4%	1:1
Operating time (mins 25 ⁰C )	40	20-30
Curing time(hours 25 ⁰C)	3~4	2-3h
Hardness (A°)	20±2	20±2
Density ( g/cm³)	1.08	1.08
Viscosity (mPas @ 25 ⁰C)	13000~15000	6000 ± 2000
Tensile-strength(kgf /cm² )	≥36	25 ± 2
Tear-strength (kgf /cm)	≥23	20
Elongation-break(%)	≥ 440	380 ± 50

Frequently asked questions of Liquid Silicone for Candle Mold Making

why the candle made by our silicone inflaming retarding?

we may check this problem with the wick we used while making the candle. Usually, the canble would be cooling in the water after shaping up. During this process, the wick with poor quality would be soaked thus the candle may not be lighted or the flame would be crushed our while burning.

Liquid RTV Silicone for Candle Mold Making

Any questions about Silicone Rubber, Leah is at your service.

TEL: 086-755-89212382

FAX: 086-755-89948030

MOBILE: 086-189 3886 7561

Website: www(dot)szrl(dot)net

E-MAIL: hyji(at)szrl(dot)net

Skype: leahchou1214

QQ: 189 3886 7561