Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $8.98200 - 40,000 kilogram
US $7.1540,001 - 999,999 kilogram
Paramtents
Color White
silicone rubber:curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation molding silicone rubber
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
RTV Mould Making Silicone Rubber, Liquid Silicone rubber For concrete statuedescription
Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.
Features of RTV Mould Making Silicone Rubber, Liquid Silicone rubber For concrete statue:
1. resistance to deformation, high-temperature
2. high reproduction times
3. good tensile strength
4. exceptional fluidity and good operability.
Standand datasheet of RTV Mould Making Silicone Rubber, Liquid Silicone rubber For concrete statue
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
638# | white | 100 : 3 | 30 | 5-10 | 38 | ≥ 38 | ≥ 28 | 34000-36000 | ≤0.3% | 380% |
630# | white | 100 : 3 | 30 | 5-10 | 30 | ≥ 47 | ≥ 35 | 28000 | ≤0.3% | 430% |
Frequently asked questions of RTV Mould Making Silicone Rubber, Liquid Silicone rubber For concrete statue
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any questions, please feel free to contact Crystal:
TEL: 086-755-89948294
FAX: 086-755-89948030
MOBILE:086-18938867509
E-mai:hyxd(at)szrl.net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.