Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.00200 - 40,000 kilogram
US $10.5040,001 - 999,999 kilogram
Paramtents
color white
State two part liquid
Sample available
Certification ISO9001:2000,SGS,RoHS
feature 1 high tensile strength
feature 2 high tear strength
feature 3 high copy times
feature 4 technical service available
feature 5 1kg and 5 kg packing is available
feature 6 easy for operation
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
molding silicone rubber is primarily intended for poly resin crafts,PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lightingand candles Buddha, furniture, furniture decorative materials, statues Buddha,artifacts copied, building decorationmold, artificial fossils Factory, Europecomponent factory, simulation landscapes, animals and plants sculpture, sandstonecrafts and so on.
E642 silicone for molding silicone rubber for man-made stone
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( shore A ) | Tensile-strength (kgf/cm2 ) | Tear-strength (KN/m) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
E642# | Translucent | 1 : 1 | 30-40 | 8-10 | 42±2 | 75 | 15 | 10000±1000 | ≤0.1% |
400% |
molding silicone rubber Feature
1. Good characteristics of easy-operation
2. Light viscosityand good fluidity
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperatureresistance, acid and alkali-resistance and ageing resistanc
molding silicone rubber instructions:
During operate the three impotant thing to payattention :
1. weigh theliquid silicone rubber and curingagent exatly .
2. Stir theliquid silcone rubber and curing agentevenly .
3.we shouldchoose the right hardness to makingdiffirent size of product mold.
Frequently asked questions of molding silicone rubber for man-made stone
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons:
1.adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break;
2.making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
Any other information needed , pls feel free to contact Shirley
0086-755-89948019 and mobile 0086-18938867596
Welcome to our website www dot szrl dot net
Shirley wish you realize your dearms in 2013!
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.