Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $16.00100 - 40,000 kilogram
US $12.0040,001 - 999,999 kilogram
Paramtents
color translucent
sample available
mixing 1:1
operation way pouring
feature high tensile strength
feature 1 high tensile strength
feature 2 high tear strength
feature 3 high copy times
Supply Ability 8 ton/day
feature 4 technical service provided
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Applications of translucent silicone rubber :
silicone rubber applicable to make food grade molds,development and design for mobile model, exquisite model,lead-zinc alloy crafts and the products with low shrinkage.
Features of translucent silicone rubber ):
Silicone rubber will not release low molecule under the condition of crosslinking,so the volume will not vary,linear shrinkage will less than 0.1%;it does not subject to the thickness of the products, and can be cured deeply;it with high tensile and tear strength and anti-yellowy under high temperature of 200.
Typical properties of translucent silicone rubber:
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( shore A ) | Tensile-strength (kgf/cm2 ) | Tear-strength (KN/m) | Viscosity after mixed (cps) | Shrinkage rate (%) | Elongation (%) |
E625 | Translucent | 1 : 1 | 30-40 | 6-8 | 25±2 | ~60 | ~15 | ~10000 | ≤0.1% |
~300% |
Step One:Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for translucent silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for translucent silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Step One:Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for translucent silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for translucent silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Any other information needed , pls feel free to contact Shirley
Tel:0086-755-89948019
mobile: 0086-15220170905/18938867596
Or mail:hyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.