Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.38200 - 40,000 kilogram
US $9.8940,001 - 999,999 kilogram
Paramtents
Color Transparent
Certificate SGS, RoHS , Reach , ISO
Mix Ration 1: 1 under the room temperature of 25C
Operation time 30-40 mins under the room temperature of 25C
Cure time 4-5 hours under the room tempeature of 25C
Delivery within 3 days after payment confirmed in our bank
Payment TT , L/C , or Western Union
Package 25kgs or 200kgs per drum
Shelf Life 12 months under the room temperature of 25C
Application For tire molds making
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
1:1 mixing ratio additional tire molding silicon rubber
Brief Introduction to 1:1 mixing ratio additional tire molding silicon rubber:
tire molding silicone rubber is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Characteristics of 1:1 mixing ratio additional tire molding silicon rubber:
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Technical Datesheets of 1:1 mixing ratio additional tire molding silicon rubber:
Item No Color Hardness (A°) Viscosity (CS) Tensile-strength( kgf /cm2 ) Tear-strength (kgf /cm2 ) Elongation-break(%) Mixing Ratio of silicone and catalyst
E620 Translucent 20±2 8000±2000 ≥60 ≥13 ≥400 1:1
E625 Translucent 25±2 10000±2000 ≥60 ≥15 ≥450 1:1
1:1 mixing ratio additional tire molding silicon rubber Operation instruction
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Any questions of 1:1 mixing ratio additional tire molding silicon rubber, please feel free to contact Caroline:
TEL: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
Email: hysf(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.