Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $18.88200 - 40,000 kilogram
US $8.8840,001 - 999,999 kilogram
Paramtents
certificate ROHS,SGS,ISO9001:2000
Colour translucent
HS code 39100000
MOQ 200kgs
features liquid
sticker available
type condensation addition
Model E610 E630 E642
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Bluestar FDA addition silicone OEM Description
casting mould 2 parts liquid FDA addition silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Bluestar FDA addition silicone OEM Applications
Bluestar FDA addition silicone OEM could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Bluestar FDA addition silicone OEM Technique Data
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of Bluestar FDA addition silicone OEM HY-E642# molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
5.Datasheet of Bluestar FDA addition silicone OEM
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (kgf/cm2) | Tear-strength (kgf/cm) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
E635# | transparent | 1: 1 | 20-30 | 2-3 | 35±2 | ≥ 93±2 | ≥ 16±2 | 10000±2000 | ≤0.1% | ≥490% |
E642# | transparent | 1: 1 | 20-30 | 2-3 | 42±2 | ≥ 103±2 | ≥ 15±2 | 10000±2000 | ≤0.1% | ≥35 |
6.
How to use bluestar addition silicone rubber |
1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 1 part A and 1 part B,mix themevenly.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Need any help on silicone rubber, please feel free to contact Ms Annie :
Tel: 0086-0755-89948294
Mob:0086-0755-18938861891
E-mail: hyjx(at)szrl(dot)net
skype: annie2012a
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.