Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
- Home
- About us
- Products
- RTV-2 silicone rubber for molds making
- Addition cure silicone rubber
- Life casting silicone rubber
- Liquid silicone rubber for insoles
- electronic potting silicone rubber
- injection moulding silicone rubber
- silicone foam
- Molding silicone rubber for tire molds
- Pad printing silicone rubber
- silicone rubber for textile coating& trademarks
- Other Silicone products
- Faqs
- News
- Certificate
- Contact us
hot sell platinum cured molding silicone for concrete casting
- FOB Price
US $12.88200 - 40,000 kilogram
US $10.2840,001 - 999,999 kilogram
- group name
- Addition cure silicone rubber
- Min Order
- 200 kilogram
- brand name
- Hong Ye silicone rubber
- model
- E642 silicone rubber
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents
- update time
- Fri, 08 Nov 2013 19:07:05 GMT
Paramtents
MOQ 200KG
payment T/T L/C Western Union
package 25kg/drum 200kg/drum
Color Any color is available
Certififcate ISO9001,SGS
Port shenzhen
HS Code 39100000
sample free
Features Liquid
Packging & Delivery
-
Min Order200 kilogram
Briefing
Detailed
hot sell platinum cured molding silicone for concrete casting
APPLICATIONS of platinum cured molding silicone for concrete casting :
E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
FEATURES of platinum cured molding silicone for concrete casting
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
Datasheets of platinum cured molding silicone for concrete casting
Model | E642# |
Appearance | High Transparent |
Mixing Ratio | 10:1 |
Viscosity part A (Mpa.s) | 55000±2000 |
Viscosity part B (Mpa.s) | 3500±1000 |
Viscosity mixed(Mpa.s) | 7000 ±1000 |
Operating time ( Mins 25°C) | 20-40mins |
Curing time ( Hrs 25°C) | 3~12hrs |
Hardness (A°) | 40-42 |
Tensile-strength(kgf /cm2 ) | 45±3 |
Tear-strength (Kgf/cm ) | 20±3 |
Elongation-break(%) | 280±30 |
Retractility(%) | ≤0.1 |
DESCRIPTION of platinum cured molding silicone for concrete casting
E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Q642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
OPERRATING INSTRUCTION of platinum cured molding silicone for concrete casting
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of platinum cured molding silicone for concrete casting :
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of platinum cured molding silicone for concrete casting
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
Any more information abt platinum cured molding silicone for concrete casting , pls feel free to contact Ms. Bella:
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net
Skype: bellajiaqi
