Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.901,000 - 40,000 kilogram
US $6.0540,001 - 999,999 kilogram
Paramtents
Colors Adjustable
Hardness subject to different models
Application size of mold Medium
Recommend operation way pouring or brushing
Retractility(%) ≤0.25
Certifications ISO,FDA,RoHS
Shelf life 12 month
Packing 25kg/drum or 200kg/drum
MOQ 200KG
Mixing ratio 1:1 or 10:1
Packging & Delivery
Min Order1000 kilogram
Briefing
Detailed
skin color silicone for making sex doll
Description of skin color silicone for making sex doll
E-625 platinum cure liquid silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds or sex products application.
Application of skin color silicone for making sex doll
E-625 platinum cure liquid silicone could be specially use for making sex doll,also mainly used for making concrete.Stones mold , jewelry mold , statue mold, artificial craft mold, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other FDA food product mold making,prototyping etc.
Advantages of skin color silicone for making sex doll
* low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1)
*good fluidity easy for pouring operation ( in round 10000 cps )
Technique Data Sheet
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Viscocity(mPa.s) | 12000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) |
(Note: the hardness , color, curing time and operation time is adjustable)
Operation instruction :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Notice
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
For getting further information , PLS contact Miss.Kelly,
E-mail: hyjm(at)szrl(dot)net
MSN:kelly6in(at)hotmail(dot)com
Skype:kelly619106
Tel: 086-18938867564
Or you can scan the QR code to send me email directly
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.