Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.98200 - 40,000 kilogram
US $10.8840,001 - 999,999 kilogram
Paramtents
color all color available
certificate SGS, MSDS, RoHS
Application for sculpture ,gypsum mold ,rock mold ,etc
Sample avalible
Payment terms T/T, L/C at sight
dupliation times 500~1000times
Delivery times 3~5days after bank receipt
hardness 0~50shore A
tear strength 18~30mps
Mixing Ration 1:1 or 10:1
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
transparent rtv2 molding silicone rubber for rapid prototyping
transparent rtv2 molding silicone rubber for rapid prototyping Applications
HY- E series addition molding silicone could be mainly used for making concrete
Stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate, candy and any other FDA food product mold making, prototyping etc.
Characteristics of transparent rtv2 molding silicone rubber for rapid prototyping
* low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
transparent rtv2 molding silicone rubber for rapid prototyping Data Sheet
Model | E642 A/B |
Mixing proportion | 1:1 or 10:1 |
Hardness (A°) | 40±2 |
Density ( g/cm 3 ) | 1.10 |
Pot life (under room temperature 23°C) | 30 mins |
De-mold time (hour) | 4~6 |
Viscosity (23 C°,mPa.s) | 6000±2000 |
Color | Translucent |
Tear-strength (kgf/cm) | ≥15 |
Tensile strength(kgf/cm2) | ≥60 |
Elongation-break(%) | ≥ 290 |
Linear shrinkage (%) | <0.1 |
Shelf Life of transparent rtv2 molding silicone rubber for rapid prototyping:
8-10 months when stored under 24°C in original unopened packages.
Package of transparent rtv2 molding silicone rubber for rapid prototyping:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Any questions abt transparent rtv2 molding silicone rubber for rapid prototyping, pls feel free to contact Ms Bella
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Mob: 008618938867572
Email: hysi(at)szrl(dot)net
Skype: bellajiaqi
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.