Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.58200 - 40,000 kilogram
US $5.5840,001 - 999,999 kilogram
Paramtents
Classification Catalyst
CAS No. 3910 00000
Other Names silicon rubber
Purity 100%
Application for mold making,accorfing to customers requirements
Certificate FDA SGS RoHS
color customized
sample avaliable
Hardness 35±2
Mix ratio 1:1 or 10:1
Curing time 2-4h
Operating time (Mins 25°C) 30-50
Shelf life 6-8month
Viscosity (CS) (After mixed) 10000 ± 2000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
body double:ong lasting Skin-safe lifecasting silicone rubber
Description of body double:ong lasting Skin-safe lifecasting silicone rubber
HY- E635# addition molding silicone is generally named two-components silicone rubber, It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications of body double:ong lasting Skin-safe lifecasting silicone rubber ,
HY- E635# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, prototyping,for life casting, trademark decoration. etc.
Technique Data of HY-E635# body double:ong lasting Skin-safe lifecasting silicone rubber
Model | HY-E635# |
Appearance | Translucent or white |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 2-4h |
Curing time (Mins 60°C) | 4-5 |
Hardness (A°) | 35±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 50 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E635# body double:ong lasting Skin-safe lifecasting silicone rubber :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
More information please feel free to contact Ms. Sarah:
Tel: 0086-755-89948013
Cell: 0086-13620974715
email:hysc(at)szrl(dot)net
skype:sarah_leung
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.