Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.98100 - 40,000 kilogram
US $10.8840,001 - 999,999 kilogram
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
ACC Silicones conformal coating application sheet
Protecting the PCB board in critical applications which are exposed to harsh environmental working conditions is essential if product failure is to be avoided. A conformal coating is normally applied as a thin layer across the surface of the board, covering all components and delicate wiring.
For any coating to be effective it must maintain good adhesion to all the component substrates, be unaffected by changes in operational temperature and be resistant to any contaminants, such as moisture and chemicals. Its ability to flow around, under and over the components without leaving areas exposed to the atmosphere especially on sharp edges, is also important.
Most conformal coatings are clear and many formulations have a UV indicator to enable easy visual quality control inspection under an ultra violet light source. Cure systems vary and include air drying, heat cured and UV cured.
Coating Types
Silicone
These 1-component silicone coatings can be formulated using either addition cure technology for heat cured and condensation cure for materials that cure at room temperature (RTV). Very fast cycle times can be achieved using a heat cured coating in conjunction with a curing oven. Their ability to withstand a very wide operating temperature range makes them suitable for aerospace and automotive applications. Silicone also has a natural ability to protect against moisture ingress.
Key Features
Any further information, please feel free to contact Ms. Judy
MOBILE: 0086-18938867591
Skype: judy.zhao723
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.