Electronic Potting Silicone Rubber transparent material

group name: electronic potting silicone rubber

Min Order: 1 kilogram

brand name: Hong Ye silicone rubber

model: Electronic Potting Silicone Rubber 9055#/9301#

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 19:25:53 GMT

contact supplier

Paramtents

condition liuqid

Packging & Delivery

Min Order1 kilogram

Briefing

Electronic Potting Silicone Rubber can be vulcanized under room/high temperature, low viscosity, easy mixing and pouring.

Detailed

Electronic Potting Silicone Rubber Tansparent Material

Electronic Potting Silicone Rubber Tansparent material Applications & Features

It can be applied to the surface of olycarbonate, PP, ABS, PVC and metal material, and also for Insulation, moisture-proof, waterproof, shockproof, electronic components, Typical uses for protection of module power supply and circuit board potting high-power electronic components which has high requirements for elimination of heat and high temperature resistance.

Electronic Potting Silicone Rubber transparent material

Electronic Potting Silicone Rubber Tansparent material Parameters

Model		HY9300
Components		A	B
Before curing	Appearance	Transparent fluid	Colorless and Transparent fluid
	Viscosisty(25°Ccps)	600±200	800±200
Operating Perform	A:B(w/w	1:1
	Mixing Viscosisty(25°Ccps)	600~1000
	Operating Time(25°C min)	180
	Curing time(25°C min	480
	Curing time(80°C min)	20
After curing	Hardness(Shore A)	0
	Thermal conductivity (w/mk)	≥0.2
	Absolution degree of dielectric (km/mm)	≥25
	Permittivity(1.2MHz)	3.0~3.3
	Volume Resistance(Ω.Cm)	≥1.0×10¹⁶
	Linear expansion (m/mk)	≤2.2×10^-4
	Flame Resistance	94-V1

Electronic Potting Silicone Rubber Tansparent material Using instruction

1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2. Weight Ratio: part A: part B = 1:1

3. Deaeration the mixture under 0.08 MPa for 5 minutes.

4. operate accordingly to above technical form, When under too low temperature and thick layer of sealant, we suggest customers appropriately heat the mixture to accelerate vulcanization, such as 80~100°C

Electronic Potting Silicone Rubber Tansparent material Packaging, storaging and transportation
1. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .

2. The product should be stored in a cool dry place, avoid the sun and rain,and kept away from fire and heat source.
3. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.

Further information, please feel free to contact Firleanna

SKYPE:HY-Firleanna

T: 86-755-892212382

M:86-18938867520

F: 86-755-89948030

3w(dot)szrl(dot)net

3w(dot)sellsilicon(dot)com

Electronic Potting Silicone Rubber transparent material