Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $9.50200 - 40,000 kilogram
US $8.5040,001 - 999,999 kilogram
Paramtents
Sample available
Mixing Ratio 1:1/ 10:1
Color dark grey/ black
Appearance Grey
Hardness(Shore A) 60±5
Curing time (min,25°C) 480
Fire Resistance 94-V0
Packaging Details 25kg/drum and 200kg/drum
Delivery Time within 3 days after payment confirmed in our bank
Payment Terms L/C at sight, T/T, West Union
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
silicone rubber for electronic components sealing
1. silicone rubber for electronic components sealing Model 9060
Applicaiton of silicone rubber for electronic components sealing :
electronic potting silicone rubber, Adhesive, coating materials, moistureproof, insulation, encapsulation,shockproof, flame retardant; High quality, high hardness shoreA,Good tensile strength,Pourable effect, deark grey and white color.
could be applied to
- high powered electronic components potting and sealing.
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for sealing and encapsulation LED screen back sealing, transformers electronic potting, Wind Power Generator, switch pack sealing
Ultra-thin PCB substrate, circuit board, switch pack encapsulation small transformer encapsulation and insulation
3. Technical Parameters of silicone rubber for electronic components sealing
silicone rubber for encapsulate transformers
Features | Part A | Part B | |
Before Curing | Appearance | Grey Fluid | White Fluid |
Viscosisty(25°Ccps) | 3000±500 | 3000±500 | |
Operation features | Mixing Ratio | 1:1/ 10:1 | |
Viscosisty(after mixing) (cps) | 2500~3500 | ||
Operating Time(25°C hr) | 120 | ||
Curing time (min,25°C) | 480 | ||
Curing time(80°C hr) | 20 | ||
After Curing | Hardness(Shore A) | 60±5 | |
Thermal conductivity [W(m·K)] | ≥0.8 | ||
Dielectric Strength(KV/mm) | ≥25 | ||
Permittivity(1.2MHz) | 3.0~3.3 | ||
Volume Resisivity(Ω·cm) | ≥1.0×1016 | ||
linear expansibility [m/(m·K)] | ≤2.2×10-4 | ||
Fire Resistance | 94-V0 |
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
4. TECHNICAL GUIDELINES of silicone rubber for electronic components sealing
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.
4, The temperature influences the curing time of HY-9060#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of 80~100°C, the silicone will cure in 15 minutes, while in 25°C room temperature, the silicone will cure around 8 hours.
5. Warm Tips of silicone rubber for electronic components sealing
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
lCondensation silicone which not completely cured or organic tin compounds
lSulphur, sulfide and sulfur rubber materials.
lAmine compounds as well as contains the amine materials.
lPewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9060 evenly before using, it does not affect the performance
Packaging Details:25kg/drum and 200kg/drum
Delivery Time:within 3 days after payment confirmed in our bank.
Payment Terms:L/C at sight, T/T, West Union
Supply Ability:8 Ton per Day
Storage and Shelf life: one year in cool dry place
If you have any questions with silicone rubber for electronic components sealing,pls feel free to contact Ms Angel Yue
MSN: angelfly369(at)msn(dot)cn
Skype:angelfly369
Email:hysa(at)szrl(dot)net
Tel:0086-755-89948019
Mob: 086-18938867575
Trademanager:cn200039753
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.