potting compound silicone for auto parts

potting compound silicone for auto parts  

potting compound silicone  application 

potting compound silicone  is good used for auto parts, LED display,  pixel tube for potting;

 DC/DC module and circuit board which requires heat dissipation and high temperature resistance.

 for LED screen, Wind Power Generator, PCB substrate, etc.

   potting compound silicone for auto parts Features

potting compound silicone for auto parts  has sticky viscosity, low shrinkage and non-corrosive.

potting compound silicone for auto parts  can be used for a long period at the temperature of -60~300 centigrade degree with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

  potting compound silicone for auto parts  operation instruction

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Mixing Ratio: part A: part B = 1:1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.

   potting compound silicone for auto parts Notice

1.  free sample is avalible

2.Reach certificate is avalible

3. MSDS, RHOS, GSG are avalible

4. 1kg/tin, 5kg/tin are avalible

Any question abt   potting compound silicone for auto parts pls free to ask Ms. Bella

Mobile: 0086-18938867572

Tel: 0086-755-89948006

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email:hysi(at)szrl(dot)net

Skype: bellajiaqi