Skin safe addition cure silicone rubber in Australia

FOB Price

US $16.20200 - 40,000 kilogram

US $13.0040,001 - 999,999 kilogram

group name: Life casting silicone rubber

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: E610# silicone rubber

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 20:29:48 GMT

contact supplier

Paramtents

color of base silicone red/white silicone
Sample of silicone free sample silicone
"Hardness (Shore A)" 10±2
"Working Time (mins)" 30-40
"Demould Time (hrs)" 4-6
"Mixing Ratio (%)" 1 : 1
sample available
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF/DDU

Packging & Delivery

Min Order200 kilogram

Briefing

Skin safe addition cure silicone rubber, skin safe silicone for life casting and body casting impressions.

Detailed

Features of Skin safe addition cure silicone rubber:

the product can be used for a long period and maintain softness and elasticity within a temperature range of -65----200 degree Celsius with the characteristics of excellent electrical performance and chemical stability, waterproof ,ozone and climate resistance. Non-corrosiveness, physical inertia, non-toxic, odorless, low linear shrinkage, easy operation, etc.

Skin safe addition cure silicone rubber applications:

Supplied as two component kits, with a base and a catalyst, Room Temperature Vulcanising (RTV) silicone rubber compounds are ready to mix. You can use RTV silicone rubber for:

a.make molds or impressions from an item, or make the actual products.

b. Different hardnesses are available. This can vary from soft and floppy for Special Effects purposes, to firm casting silicone for patternmakers, as well as high temperature silicone for casting metal alloys.

c. addition cured silicones, skin safe silicone for life casting and body casting impressions, as well as other fast moldmaking requirements.

Avoiding mistakes with addition cure silicone

Any cured addition silicone may cause inhibition on any uncured addition silicone surface, so it is essential an even coat of a suitable release agent forms a barrier between any adjoining surfaces. Addition cure silicones are also intolerant of sulphur, tin and amines, many materials contain these elements and should be avoided. Always ask your technician for help identifying safe materials to use if you are unsure. However, it is generally not recommended that silicone moulds be used to cast silicone parts, because it is difficult to ensure a complete seal of the surface especially with when dealing with complex shapes and fine detail.

If a rubber component is required from a silicone mould, a polyurethane rubber should always be the preferred casting material.

Note: Many addition cure silicones are incompatible with polyurethane rubbers.

Skin safe addition cure silicone rubber in Australia

Using instructions of Skin safe addition cure silicone rubber:

mix component A and component B evenly according to the mixing proportion of 1-0.95-1.05,and can be poured after desired the bubbles, the operating time(3-5)hours depends on the temperature, the curing time is 12-24 hours at the room temperature, and the curing time can be reduced to 10 minutes with the temperature increased to 80-120 degree Celsius. the operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 1hour.the product can be produced in red .yellow ,etc .according to the customer's requirements.

Model	Appearance	Hardness (Shore A)	Tear-strength (kgf/cm)	Tensile-strength (kgf/cm²)	Elongation(%)	Viscosity (cp)	Working Time (mins)	Demould Time (hrs)	Mixing Ratio (%)
E600	Translucent	0±2	≈2	≈15	≈ 400	≈2000	50-60	4-6	1 : 1
E605	Translucent	5±2	≈8	≈25	≈500	≈2500	30-40	4-6	1 : 1
E610	Translucent	10±2	≈12	≈30	≈550	≈4000	30-40	4-6	1 : 1

Precautions of skin safe silicone rubber for life casting :

This product is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur. Phosphorus and nitrogen will influence the vulcanization of the silicone rubber, so please do not mix with or touch those substances during using.

Please dont hesitate to ask if you have any questions about Skin safe addition cure silicone rubber, here Aimee is at your service:

MSN: aimeezhou055722(at)hotmail(dot)com
Skype: amee055722

Email:hysz(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867541
Trademanager:cn200039753