platinum cured silicone for mask making

platinum cured silicone for mask making

1. Description of platinum cured silicone for mask making:

Platinum cured silicone for mask making is generally named two-component silicone Rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1), mainly be suitable for mold making, life casting, silicone products.

2. Application of platinum cured silicone for mask making:

Platinum cured silicone for mask makingcould be mainly used for making concrete, stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate, candy and any other FDA food product mold making, prototyping etc.

3. Characteristics of platinum cured silicone for mask making:

1. Low shrinkage (less than 0.1%)

2. High tensile and tear strength with high copy times

3. Easy for operation (mixing ratio at 1:1 /10:1)

4. Very good flow and easy for pouring operation

5. Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

4. Operation of platinum cured silicone for mask making:

1. Clear the model and tool totally before operation to prevent cure inhibition.

2. Weigh the two parts correctly by electronic weight in two separate containers.

3. Mixing the two parts in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes.

4. Get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes. (If there is no vacuum machine, please pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame.

Any other information needed for platinum cured silicone for mask making, please feel free to contact Orianna

Tel: 0086-755-89311348

Mobile: 0086-18938867545

Or email: hyyg(at)szrl(dot)net

Welcome to our website: www dot szrl dot net