Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.89200 - 40,000 kilogram
US $9.3940,001 - 999,999 kilogram
Paramtents
Color Translucent
Appearance Fluid
Mix ratio 1:1
Application Make bay nipples
HS Code 39100000
MOQ 200 KG
Delivery time 3 days after payment confirmed
Payment terms T/T, L/C
Package 20kg/drum and 200kg/drum
Shelf life 12 months
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Food Grade Injection Silicone Rubber Products Tipical Properities and application
HY-920 and HY-950 is a food grade injection molding liquid silicone rubber for Baby care products such as Baby nipples,pacifier, teather,toothbrush and other food grade injection products.They are elastomer cured under high temperature,has the following excellent properies:
1>High transparency
2>Excellent tear Strength(>3.5KN/m)
3>Good resilience
4>Good heat stability and weatherability(temperature resistant range from -60°C to 250°C)
5>Anti-yellowing
6>Heat-ageing resistance
7>Comply with USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard
Food Grade Injection Silicone Rubber Products Specific usage
HY-920 with 20 shore A is suitable for making Pacifiers/nipples for Babies whose age is from 1 month to 1-year-old
HY-950 with 50 shore A is mainly for making Pacifiers/nipples for Babies whose age is from 1year-old to 3-year-old.
Curing Condition:
After Mixed A with B according to mixing ratio of 1:1,
150mm X 150mm X 2mm, mould will be formed in 7minutes under temperatuer of 150 °C
Food Grade Injection Silicone Rubber Products Standard Datasheet
Item | HY-920 | HY-950 |
Appearance | Transparent | Transparent |
Mixing ratio | 1:1 | 1:1 |
Viscosity (Pa.S) | 300 | 600 |
Density (g/cm3) | 1.07 | 1.08 |
Hardness (A°) | 20 | 50 |
Elongation at break (%) | 420 | 510 |
Tear strength (KN/m) | 25 | 36 |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
Package:The general packages of HY-930 and HY-950 is 20kg or 200kg per barrel.
Notice
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
The viscocity ,hardness and appearance/color of above products can be adjusted according to customer’s specific requirements.
Any further information about food grade injection silicone rubber products, please feel free to contact Ms. Judy
MOBILE: 0086-18938867591
SKYPE: judy.zhao723
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.