Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.23100 - 40,000 kilogram
US $8.5040,001 - 999,999 kilogram
Paramtents
Model HY-923
Appearance translucent
Mixing ratio 1:1
Density (g/cm3) 1.07
Hardness (Shore A) 40
Tensile strength (N/mm2) 6.5
Elongation at break (%) 550
Tear strength(N/mm) 35
shelf life 8~10 month
MOQ 200kg
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Standard Datasheet of Injection Molding Silicone Rubber for Baby Care Products
Item | HY-920 | HY-950 |
Appearance | Transparent | Transparent |
Mixing ratio | 1:1 | 1:1 |
Viscosity (Pa.S) | 300 | 600 |
Density (g/cm3) | 1.07 | 1.08 |
Hardness (A°) | 20 | 50 |
Elongation at break (%) | 420 | 510 |
Tear strength (KN/m) | 25 | 36 |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
Typical Prosperities and application of Injection Molding Silicone Rubber for Baby Care Products:
HY-920 and HY-950 is an injection molding liquid silicone rubber for Baby care products such as Baby nipples, pacifier, toothbrush and other food grade injection products. They are elastomer cured under high temperature, has the following excellent properties:
1 High transparency
2 Excellent tear Strength (>3.5KN/m)
3 Good resilience
4 Good heat stability and weatherability(temperature resistant range from -60°C to 250°C)
5 Anti-yellowing
6 Heat-ageing resistance
7 Comply with USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard
Specific usage of Injection Molding Silicone Rubber for Baby Care Products:
HY-920 with 20 shore A is suitable for making Pacifiers/nipples for Babies whose age is from 1 month to 1-year-old
HY-950 with 50 shore A is mainly for making Pacifiers/nipples for Babies whose age is from 1year-old to 3-year-old.
Curing Condition:
After Mixed A with B according to mixing ratio of 1:1, 150mm X 150mm X 2mm, mould will be formed in 7minutes under temperature of 150 °C
Package:The general packages of HY-930 and HY-950 is 20kg or 200kg per barrel.
Notice:
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
The viscosity, hardness and appearance/color of above products can be adjusted according to customer’s specific requirements.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.