High Transparency LSR liquid injection cure silicone rubber

                                              High Transparency LSR liquid injection cure silicone rubber

Specifications of High Transparency LSR liquid injection cure silicone rubber

1.Odorless
2.High tensile strength
3.Apply to injection molding progress
4.RoHS certificated,FDA,LFGB certificated

Introduction to High Transparency LSR liquid injection cure silicone rubber

The product is a two-component,translucent, add liquid silicone rubberwith superior mechanicalproperties, particularly forbutton production of silicone rubber in high hardness and high strength

Features of High Transparency LSR liquid injection cure silicone rubber

Fast curing; high transparency;superior mechanicalproperties; No curing by-products; Easy color; Safe non-toxic; Good ventilation;Heat resistance; Good weatherresistance.

Applications of High Transparency LSR liquid injection cure silicone rubber

Electronic key products of mobile phone; mask material; baby bottle,nipple

Appearance of High Transparency LSR liquid injection cure silicone rubber 

 Part A :Translucent liquid

Part B :Translucent liquid
Viscosity(25°C, Rotational Viscometer )
 Part A :2000Pa.S

Part B :2500Pa.S

How to use  High Transparency LSR liquid injection cure silicone rubber

1.Mixed A with Baccording to mixing ratio of 1:1 through the static mixer,then injectingthe mixed rubber into the mold through the injection machine, the rubber mustbe full filled (hand-mixing isfeasible, poured into the mold for molding)

2.Recommendedmolding conditions: 140°C/40-60s (thickness 2mm).

3.Testand determine the specific conditions of molding according to the thickness orsize of product

4.Ifthe bonding between the special material and silicone rubber is needed(e.g. PET,PC, iron andsteel materials, etc.you can check the accessory products of the silicone adhesive about our company )

Storage of High Transparency LSR liquid injection cure silicone rubber

Store this product sealed incool, dry and ventilated conditions;

Storage temperature :during 0~37°C

Collect and store the productwith galvanized metal, polyethylene or polypropylene containers.

Shelf life of High Transparency LSR liquid injection cure silicone rubber

12 months under above conditions.It remain can be used after shelf life if the technical data is qualified.

Package of High Transparency LSR liquid injection cure silicone rubber

Packagethe part A and part B with plastic drum .and 20Lfor each part, the net weightis 20kg

Notes

1.Separate or wipe clean the toolsof part A,B before use , or it may cause the product can’t working normally because of the A&B mixedand local agglomeration

2.The effective operating time is 4hours after the uniform mix between part A&B

3.During the rubber operation, avoidcontact the compounds which contains the N, S, P, Sn, etc, or it will causeincomplete curing or not curing.

4.The best mix ratio is A/B=1:1, toolarge or too small will influence the final product performance Safe

More information about the High Transparency LSR liquid injection cure silicone rubber , please don't hesitate to contact with Miss Caroline at any time:

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net