Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $20.00200 - 40,000 kilogram
US $8.0040,001 - 999,999 kilogram
Paramtents
color transparent/grey/black/white
Hardness 30
Tear strength 25N/mm
Tensile strength 6.5N/mm2
sample available
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF/DDU
Payment terms T/T, L/C
MOQ 100KG
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Application of liquid injection moulding silicone for keypad :
lnjection moulding silicone is a liquid silicone rubber suitable for injecting moulding technique with high transparency, strength, and tear strength.
suitable for making baby nipples and keypad production with injection moulding machine.
Specifications of liquid injection moulding silicone for keypad
Vulcanisates consisting of HY-924 are distinguished by the following properties:
High productivity, high transparence
High flowability, low viscosity and short injection time.
Low volatiles content; Fast cure
Excellent mold release, Excellent Thermal stability
Excellent compression set; Excellent resilience
High stability to ozone and ultraviolet light
Outstanding resistance to ageing
Not readily combustible, does not melt or drip
Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
3.Injection molding silicone rubber HY-924 Standard Datasheet :
HY-924 Liquid Silicone for Injection Molding | |||
|
| A Component | B Component |
Appearance |
| transparent | transparent |
Viscosity in Pa.s | DIN 53018 | 400 | 400 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.07 |
Hardness | DIN 53 505 | Shore A | 30 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 400 |
Tear strength | ASTM D 624 die B | N/mm | 25 |
4.Instruction of liquid injection moulding silicone for keypad
Ready-to-use mixtures (of the components A and B) are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
5.Package of liquid injection moulding silicone for keypad
Packaging Details: 20kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C at sight, T/T, West Union Notice of Electronic Potting silicone
Notice:1. sample is avalible
2. Reach certificate is avalible
3. FDA ,MSDS, RHOS, GSG are avalible
If you have any questions with liquid injection moulding silicone for keypad ,feel free to contact Ms Aimee
MSN:aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email: hysz(at)szrl(dot)net
Tel: 0086-755-89948019
Mob: 086-18938867541
ademanager:cn200039753
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.