Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.60500 - 40,000 kilogram
US $8.1040,001 - 999,999 kilogram
Paramtents
component 2 parts
usage making silicone cube
color translucent
Hardness 42 Shore A
cetificate EU RoHS Standard /USA CFR21.Part.177.2600
Mixing ratio 1:1
sample available
origin China
payment T/T W/U L/C
Packging & Delivery
Min Order500 kilogram
Briefing
Detailed
Liquid Injection Molding Silicone for tube making
Description of Injection Molding Silicone Rubber:
liquid silicone rubber(LSR) for Injection molding is a two-part high purity addition cured silicone specifically designed for liquid injection molding, which can be fully automatically injection molded without secondary processing. They are platinum curing and vulcanize under heat and pressure.
Datasheet of Injection Molding Silicone Rubber
Model HY-E642#
Appearance Translucent
Mixing Ratio 1:1
Operating time (Mins 25°C) 30-50
Curing time (Mins 25°C) 3-4h
Hardness (A°) 42±2
Density ( g/cm 3 ) 1.08
Viscosity (CS) (Part A) 30000 ± 5000
Viscosity (CS) (Part B) 5000 ± 500
Viscosity (CS) (After mixed) 10000 ± 2000
Tensile-strength( kgf /cm2 ) 100 ± 20
Tear-strength (kgf /cm2 ) >15
Elongation-break(%) 350 ± 50
Retractility(%) ≤0.1
Typical Prosperities and application of Injection Molding Silicone Rubber :
HY-E642# is an injection molding liquid silicone rubber for Baby care products such as Baby nipples, pacifier, toothbrush and other food grade injection products. They are elastomer cured under high temperature, has the following excellent properties:
1 High transparency
2 Excellent tear Strength (>3.5KN/m)
3 Good resilience
4 Good heat stability and weatherability(temperature resistant range from -60°C to 250°C)
5 Anti-yellowing
6 Heat-ageing resistance
7 Comply with USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard
Curing Condition:
After Mixed A with B according to mixing ratio of 1:1, 150mm X 150mm X 2mm, mould will be formed in 7minutes under temperature of 150 °C
Package:The general packages of HY-E642# is 20kg or 200kg per barrel.
Notice:
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
The viscosity, hardness and appearance/color of above products can be adjusted according to customer’s specific requirements.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.