Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.39200 - 40,000 kilogram
US $8.9840,001 - 999,999 kilogram
Paramtents
Color High Transparent
Certificate FDA, SGS, RoHS , Reach , ISO, MSDS
Packge 20kgs or 200kgs per pair
Payment TT. L/C , Western union
Delivery within 3 days
Tear Strength 25KN/M
Shrinkage less than 0.1%
Cure time 20-50 seconds under 150C
Mix Ratio 1: 1
Shelf Life 12 months
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
A+B two part-silicone rubber for (Making) baby nipples
A+B two pats- silicone rubber for9 Making) baby nipples is a two-component liquid silicone rubber for injection molding processes. HY-923 shows a higher productivity, less yellowing and low volatile contents. HY-923 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Application of A+B two part-silicone rubber for (Making) baby nipples:
Because of the outstanding properties,HY-923 is particularly suitable for the following elastomeric articles: baby nipples . sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Specification of A+B two part-silicone rubber for (Making) baby nipples:
Vulcanisates consisting of HY-923 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Typical Physical Properties
HY-923 Liquid Silicone for Injection Molding | |||
|
| A Component | B Component |
Appearance |
| translucent | translucent |
Viscosity in Pa.s | DIN 53018 | 600 | 600 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.08 |
Hardness | DIN 53 505 | Shore A | 40 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 550 |
Tear strength | ASTM D 624 die B | N/mm | 35 |
Processing Recommendations of A+B two part-silicone rubber for (Making) baby nipples
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
SHELF LIFE of A+B two part-silicone rubber for (Making) baby nipples:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE of A+B two part-silicone rubber for (Making) baby nipples:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If you need any more information about the A+B two parts -silicone rubber for (Making) baby nipples , pls don't hesitate to contact with Miss Caroline at any time:
TEL: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.