Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $9.88200 - 40,000 kilogram
US $8.8840,001 - 999,999 kilogram
Paramtents
MOQ 200kg
Payment T/T L/C Western union
Color Any color
Package 25kg/drum 200kg/drum
FOB Price US$8.88-9.88
Features liquid
Port shenzhen
Certifications RoHS, MSDS, SGS, ISO9001:2000
Hs code 39100000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Cheap transparent LSR for Injection Molding
Cheap transparent LSR for Injection Molding is a two-component liquid silicone rubber for injection molding processes. LSR for Injection Molding shows a higher productivity, less yellowing and low volatile contents. LSR for Injection Molding would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Specification of LSR for Injection Molding:
Vulcanisates consisting of LSR for Injection Molding are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Application of LSR for Injection Molding:
Because of the outstanding properties, LSR for Injection Molding is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Typical Physical Properties of LSR for Injection Molding:
HY-923 LSR for Injection Molding | |||
|
| A Component | B Component |
Appearance |
| translucent | translucent |
Viscosity in Pa.s | DIN 53018 | 600 | 600 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.08 |
Hardness | DIN 53 505 | Shore A | 40 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 550 |
Tear strength | ASTM D 624 die B | N/mm | 35 |
Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
SHELF LIFE of LSR for Injection Molding:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE of LSR for Injection Molding:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail
Any questions about the LSRfor Injection Molding , please feel free to contact Ms. Bella
Tel: 86-755-89212380
Mob: 86-18938867572
Fax: 86-755-89948030
Email: hysi(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.