Supply High Quality Liquid injection molding Silicone Rubber

 Liquid injection molding Silicone Rubber Application:

Because of the outstanding properties,HY-2130is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.

Liquid injection molding Silicone Rubber Description:

Liquid Silicone for Injection Molding, HY-2130 is a two-component liquid silicone rubber for injection molding processes. The silicone rubber shows a higher productivity, high transparence, less yellowing and low volatile contents. It would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.

 Liquid injection molding Silicone Rubber Advantage:

1. Material is liquid silicone rubber (LSR) with platinum(Pt) vulcanization

2. FDA approval

3. No odor/smell, high precision and high transparent

4.Customize(drawing,sample)

Liquid injection molding Silicone Rubber Specification:

Vulcanisates consisting of liquid silicone rubber, HY-2130 are distinguished by the following properties:

·High productivity, high transparence

·High flowability, low viscosity and short injection time.

·Low volatiles content; Fast cure

·Excellent mold release, Excellent Thermal stability

·Excellent compression set; Excellent resilience

·High stability to ozone and ultraviolet light

·Outstanding resistance to ageing

·Not readily combustible, does not melt or drip

·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW

Liquid injection molding Silicone Rubber Typical Physical Properties:

Liquid injection molding Silicone Rubber Processing Recommendations:

Ready-to-use mixtures (of the components A and B)of HY-2130 are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.

Liquid injection molding Silicone Rubber Shelf life:

Correctly stored in HY-2130 its original unopened container at room temperature (24°C). The liquid silicone rubber has a shelf life of 6-8 months from the date of manufacturing. Containers, which have been opened, must be kept tightly closed afterwards

 Liquid injection molding Silicone Rubber Caution: 

(1)away from the fire ,avoid contact with sharp objests

(2Sterilize before using boiling water and store in a clean and safe place to mantain the health of your baby.

(3)Check the bottle and the nipple frequently. Replace immediately if any crevice or scratch is detected

Liquid injection molding Silicone Rubber Package:

20kg/drum part A + 20kg/drum part B and 200kg/drum part A + 200kg/drum part B.

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89948294

Mob:86-15989267535

E-mail: hysh(at)szrl(dot)net  

Skype:Kity-467707861

.