Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.50200 - 40,000 kilogram
US $8.8940,001 - 999,999 kilogram
Paramtents
Color high translucent
silicone rubber:curing agent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Chemical Auxiliary Agent Fluid
Appliacation make injection
Port shenzhen
Place China
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
FDA Liquid injection molding silicone rubber Application:
Because of the outstanding properties,HY-2130is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.
Liquid injection molding Silicone Rubber Advantage:
1. Material is liquid silicone rubber (LSR) with platinum(Pt) vulcanization
2. FDA approval
3. No odor/smell, high precision and high transparent
4.Customize(drawing,sample)
FDA Liquid injection molding silicone rubber Specification:
Vulcanisates consisting of liquid silicone rubber, HY-2130 are distinguished by the following properties:
·High productivity, high transparence
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
FDA Liquid injection molding silicone rubber Typical Physical Properties:
Product | HY-2130 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
FDA Liquid injection molding silicone rubber Processing Recommendations:
Ready-to-use mixtures (of the components A and B)of HY-2130 are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
FDA Liquid injection molding silicone rubber Shelf life:
Correctly stored in HY-2130its original unopened container at room temperature (24°C). The liquid silicone rubber has a shelf life of 6-8 months from the date of manufacturing. Containers, which have been opened, must be kept tightly closed afterwards
FDA Liquid injection molding silicone rubber Caution:
(1)away from the fire ,avoid contact with sharp objests
(2Sterilize before using boiling water and store in a clean and safe place to mantain the health of your baby.
(3)Check the bottle and the nipple frequently. Replace immediately if any crevice or scratch is detected
FDA Liquid injection molding silicone rubber Package:
20kg/drum part A + 20kg/drum part B and 200kg/drum part A + 200kg/drum part B.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:Kity-467707861
.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.