Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.50200 - 40,000 kilogram
US $6.0540,001 - 999,999 kilogram
Paramtents
colour customized
features easy operate
certifications RoHS. MSDS.SGS ISO9001:2000
payment TT/LC
samples available
type manufacture
main market Europe ,Mid East,South Africa
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
resin decrations injection molding silicone rubber manufactue
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 20-30 |
Curing time (Mins 25°C) | 2-3h |
Hardness (A°) | 20±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) | 6000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 25 ± 2 |
Tear-strength (kgf /cm2 ) | 20 |
Elongation-break(%) | 380 ± 50 |
Retractility(%) | ≤0.1 |
Operation of HY-E620# crafts Injection Molding liquid silicone rubber ,
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Anything we can help, please feel free to contact kelly:
MOBILE:086-18690907219
Website: www(dot)szrl(dot)net
E-MAIL: kelly6in(at)gmail(dot)com
Skype:kelly619106
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.