Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $13.50200 - 40,000 kilogram
US $9.8840,001 - 999,999 kilogram
Paramtents
Color high translucent
Port shenzhen
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Chemical Auxiliary Agent Fluid
Appliacation silicone rubber for baby nipple
Sample Available
HS code 39100000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
silicone rubber for baby nipple appilication:
silicone rubber for baby nipple addition cure injection moulding silicone with high performance
and tear strength. It is mainly used for making silicone products,such as baby nipples, medical tube,key board etc.
silicone rubber for baby nipple typical properties:
High tear strength(≥25KN/m)
Good resilience
Anti-yellowing
Heat-ageing resistance
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EU RoHS Standard.
silicone rubber for baby nipple picture show:
silicone rubber for baby nipple datasheet:
Item | 921 | |
Appearance | Translucent | |
Viscosity (Pa.S) | 400 | |
Density (g/cm3) | 1.07 | |
Hardness (A°) | 55-60 | |
Elongation at break (%) | 400 | |
Tear strength (KN/m) | 25 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
After the component A and component B are mixed under the temperature of 20C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
silicone rubber for baby nipple introducstion:
Typical data can not be directly used for actual production guidance. Please contact us for details.
1.away from the fire ,avoid contact with sharp objests
2.Sterilize before using boiling water and store in a clean and safe place to mantain the health of your baby.
3.Check the bottle and the nipple frequently.Replace immediately if any crevice or scratch is detected.
silicone rubber for baby nipple package:
The general packages of HY-92XA/B series is in 20kg and 200kg per barrel.
silicone rubber for baby nipple certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:Kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
silicone rubber for baby nipple certification:
About us:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.