Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $8.30200 - 40,000 kilogram
US $7.2040,001 - 999,999 kilogram
Paramtents
color Translucent silicone rubber
Viscosity (Pa.S) 700
Density (g/cm3) 1.12
Hardness (A°) 50
Elongation at break (%) 450
Tear strength (KN/mm) 35
Curing condition 7 minutes under temperature of 150℃
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF/DDU
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Injection moulding silicone rubber for Jewelry
The product is liquid silicone rubber suitable for injecting moulding technique with high transparency, strength, and tear strength. It is mainly used for making silicone products,such as Jewelry, baby nipples, medical tube,etc.
Typical Properties of Injection moulding silicone rubber for Jewelry
Injection moulding silicone rubber for Jewelry , which is an elastomer cured under high temperature, has the following excellent properties:
High transparency
Excellent tear strength(≥35N/mm)
Good resilience
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Anti-yellowing
Heat-ageing resistance
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
Standard Datasheet of Injection moulding silicone rubber for Jewelry:
Item | HY-924 | |
Appearance | Transparent | |
Viscosity (Pa.S) | 600 | |
Density (g/cm3) | 1.12 | |
Hardness (A°) | 45-50 | |
Elongation at break (%) | 380 | |
Tear strength (KN/mm) | 35 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
Instruction of Injection moulding silicone rubber for Jewelry
Typical data can not be directly used for actual production guidance. Please contact us for details.
Package of Injection moulding silicone rubber for Jewelry
The general packages of Injection moulding silicone rubber for Jewelry series is in 20kg and 200kg per barrel.
Other applications of Injection moulding silicone rubber for Jewelry
The series of products can also be used for producing other food grade silicone rubber products.
If you have any questions with Injection moulding silicone rubber for Jewelry, feel free to contact Ms Aimee
MSN: aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email:hysz(at)szrl(dot)net
Tel: 0086-755-89948019
Mob: 086-18938867541
Trademanager:cn200039753
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.