Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.88200 - 40,000 kilogram
US $12.9840,001 - 999,999 kilogram
Paramtents
Color transparent
Viscosity 8000-33000
MOQ 200KG
Application mold making
Sample Available
Payment T/T L/C Western union
Package 25kg/drum 200kg/drum
Features Liquid
Port shenzhen
HS Code 39100000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
baby nipples injection molding silicone rubber is a two-component liquid silicone rubber for injection molding processes. MJ2235 shows a higher productivity, less yellowing and low volatile contents. MJ2235 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Specification of baby nipples injection molding silicone rubber:
Vulcanisates consisting of MJ2235 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Application of baby nipples injection molding silicone rubber:
Because of the outstanding properties,MJ2235 is particularly suitable for the following elastomeric articles: baby nipples . sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Typical Physical Properties of baby nipples injection molding silicone rubber
MJ2235 Liquid Silicone for Injection Molding | |||
|
| A Component | B Component |
Appearance |
| translucent | translucent |
Viscosity in Pa.s | DIN 53018 | 600 | 600 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.08 |
Hardness | DIN 53 505 | Shore A | 35 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 550 |
Tear strength | ASTM D 624 die B | N/mm | 35 |
Any question about silicon rubber, Pls feel free to contact Christy
TEL: 086-755-89948006
FAX: 086-755-89948030
Mobile: 86-189 3886 7547
Skype: christyxu911
Email: hyxj(at)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.